Features :

Superb Speech Intelligibility

Slim Unobtrusive Design

Wide Horizontal Dispersion

Vertical Beam Steering

Integral DSP power offering:
- Control of Vertical Beam opening angle, elevation angle and focus distance
- 8-band overall parametric EQ
- Dual Line Inputs with individual volume and 4-band parametric EQ control
- Volume Control
- Delay up to 20 seconds + 10 seconds per input
- Up to 8 user definable, password protected presets on board (recallable through third party control devices)
- AVC (Automatic Volume Control) via build-in ambient mic.
- Upgradeable firmware
- Dual Lobe Software

Network Ready

Integral Surveillance

Simulation via DDA, Catt-Acoustic, Odeon and EASE4.3


The AXYS® Intellivox-DC1608

is the successor to the Intellivox-1608 which was the world’s first commercially
available digitally controlled high power loudspeaker array
and since its introduction in 1999 the Intellivox-1608 has been specified to
solve the problems of speech intelligibility and musical reinforcement in large highly reverberant spaces and theatres.

The Intellivox-DC1608 is offering extreme improved sonic performance compared to its predecessor. The Intellivox-DC1608 is ideally suited for Sports Arenas, Multipurpose Venues (including Cathedral style buildings),
Concert Halls and Theatres. As well as offering extended frequency response,
up to 20 kHz, the Intellivox-DC1608 is capable of delivering up to 108 dB SPL at 30 m.

With an array length of 3.7 m the Intellivox-DC1608 not only offers long throw capability but also greater control at low frequencies.

A single Intellivox-DC1608 is capable of covering an audience area up to 50 m whilst maintaining an even sound pressure level. For full range applications AXYS® Target Series digitally controlled sub woofer arrays can be used to provide enhancement and control at low frequencies.

In order to achieve such outstanding performance the Intellivox-DC1608 comes with an external 3RU IntelliAmp that is equipped with a 32- bit floating point DSP (Digital Signal Processor) which handles the demanding mathematical calculations that are necessary to achieve highly accurate directivity control.

In addition to this the DSP offers a wealth of useful audio processing features including: volume control, parametric EQ and delay.

The fourteen, high efficiency, 6.5” loudspeakers are arranged in accordance with our patented algorithm. In addition to the 6.5” loudspeakers there are also two coaxially mounted 1” compression drivers to extend the HF response.

Power for the multi channel IntelliAmp is provided by a sophisticated switched mode power supply which will ensure years of reliable operation.

An extensive set of surveillance functions have also been implemented to meet the stringent demands of typical VA applications.

The unit can be controlled using our proprietary WinControl software which offers user friendly control of the beam steering parameters, audio processing and surveillance features.

Typical applications include:

Transport Hubs

Large Places of Worship

Lecture Halls and Theatres

Large Conference Facilities

Atriums

Museums

3D direct SPL plot @ 1 kHz in a 70 x 56 x 35 m room, generated with DDA, showing the suppression above the listening plane (over sized room only for comparison reasons).

Options available include:

External Ambient Noise and Temperature Sensor

Input section with 1x 0dBV and 1x 100V

Full range of mounting accessories

Color matching service

Vertical cross section of direct SPL plot @ 1 kHz generated with DDA.