Dual
Line Inputs each with individual
volume, delay (10 seconds) and
EQ (4-band parametric)
Volume
Control
Delay
(up to 20 seconds)
8
band parametric EQ
8
user definable, password protected
presets on board (recallable through
third party control devices)
AVC
(Automatic Volume Control) via
build-in ambient mic.
Upgradeable
firmware
Network
Ready
Integral
Surveillance
Simulation
via DDA, Catt-Acoustic, Odeon and
EASE4.3
The AXYS®
Intellivox-DS115, the smallest member
of the Intellivox DDS range, is primarily
designed to be used as a ‘fill
system’ in larger Intellivox installations,
providing high frequency coverage in
off axis or shadowed areas. Despite
its modest dimensions, the Intellivox-DS115
still offers remarkable directivity
control and is capable of covering an
area up to 15 m whilst maintaining an
even sound pressure over the audience
area. Since its introduction the Intellivox-DS115
has become very popular for mobile applications
(it is especially effective for hotel
suite style conferencing.) and has also
been widely uised in boardroom applications.
In order to achieve such outstanding
performance the Intellivox-DS115 is
equipped with a 32-bit floating point
DSP (Digital Signal Processor) which
handles the demanding mathematical calculations
that are necessary to achieve highly
accurate directivity control, in this
case beam shaping. In addition to this
the DSP offers a wealth of useful audio
processing features including: volume
control, parametric EQ and delay. The
six, custom designed, 4" loudspeakers
and two dome tweeters are driven by
an eight channel class-D amplifier,
power for which is provided by a sophisticated
switched mode power supply, all of which
combine to ensure years of reliable
operation. An extensive set of surveillance
functions have also been implemented
to meet the stringent demands of typical
Voice Alarm (life safety) applications.
The unit can be controlled using our
proprietary WinControl software which
offers user friendly control of the
DDS Beam files, audio processing and
surveillance features. Its compact array
length make the Intellivox-DS115 suitable
for easy and unobtrusive implementation
in even the most architecturally sensitive
environment. The Intellivox-DC115, with
its extended high frequency response,
is well suited for music applications
and can offer ‘full range’
operation when combined with an AXYS®
active sub woofer system.
Typical
applications include:
Boardrooms
Fill
System in larger Intellivox installations
Hotel
Style Conferencing
Mobile
Applications
Press
Rooms
A/V
Presentation Rooms
3D
direct SPL plot @ 1 kHz in a 70 x 56
x 35 m room, generated with DDA, showing
thesuppression
above the listening plane (over sized
room only for comparison reasons).
Options
available include:
External
Ambient Noise and Temperature Sensor
Input
section with 1x 0dBV and 1x 100V
Input
section with 2x 100V
Full
range of mounting accessories
Color
matching service
Vertical
cross section of direct SPL plot @ 1
kHz generated with DDA.
- Short form specifications:
Acoustical:
Freq range
:
130 - 20k Hz (+/-3 dB)
Max SPL
Continuous:
85 dBSPL (A-weighed at 30 m)
Peak:
88 dBSPL (A-weighed at 30 m)
Coverage
Horizontal (fixed):
130 deg (-6dB, averaged 1k to 4k Hz)
Vertical (adjustable):
Defined by DDS algorithm
Typical throw:
15 m
Dynamic range
:
>100 dB
Electrical:
Input
Nominal level:
0 dBV (line input)
Type:
dual line input, transformer balanced
Impedance (balanced):
6k8 Ohm
DSP module
Type:
floating point 900 MFLOPS 32 bits
Memory:
64Mb SDRAM + 3Mb non volatile
AD - DA conversion:
24 bits sigma-delta 128 x oversampling
Power amps
Type:
PWM (Class D)
Power:
8 x 40 Wrms (4 Ohm)
Mains
Voltage (+5%/-10%):
230 or 115V
Power consumption:
58 VA (idle) / 325 VA (full load)
General
Temperature range (ambient)
:
0 to 40°C
Transducers
:
6 x 4" full range 2 x 10 mm ferrofluid cooled tweeter, coaxially mounted
