Amplifier
supplied with integral DSP power offering:
Control
of Vertical Beam Shaping
Dual
Line Inputs each with individual
volume, delay (10 seconds) and
EQ (4-band parametric)
Volume
Control
Delay
(up to 20 seconds)
8
band parametric EQ
8
user definable, password protected
presets on board (recallable through
third party control devices)
AVC
(Automatic Volume Control) via
build-in ambient mic.
Upgradeable
firmware
Network Ready
Amplifier supplied with Integral Surveillance
Simulation via DDA, Catt-Acoustic, Odeon and EASE4.3
The AXYS® Intellivox-DS1608 was the world’s first commercially available beam shaping high power loudspeaker array and since its introduction in 1999 the Intellivox-1608 has been specified to solve the problems of speech intelligibility and musical reinforcement in large highly reverberant spaces and theatres. The Intellivox-DC1608 is ideally suited for Sports Arenas, Multipurpose Venues (including Cathedral style buildings), Concert Halls and Theatres. As well as offering an extended frequency response, up to 18 kHz, the Intellivox-DS1608 is capable of delivering up to 108 dB SPL at 30 m. With an array length of 3.7 m the Intellivox-DS1608 not only offers long throw capability but also greater control at low frequencies. A single Intellivox-DS1608 is capable of covering an audience area up to 50 m whilst maintaining an even sound pressure level. For full range applications AXYS® Beam Shaping Subwoofers can be used in conjection with the 1608 to provide enhancement and control at low frequencies. In order to achieve such outstanding performance the Intellivox-DS1608 comes with an external 3RU IntelliAmp that is equipped with a 32- bit floating point DSP (Digital Signal Processor) which handles the demanding mathematical calculations that are necessary to achieve highly accurate directivity control, in this case beam shaping. In addition to this the DSP offers a wealth of useful audio processing features including: volume control, parametric EQ and delay. The fourteen, high efficiency, 6.5” loudspeakers are arranged in accordance with our patented algorithm. In addition to the 6.5” loudspeakers there are also two coaxially mounted 1” compression drivers to extend the HF response. Power for the multi channel IntelliAmp is provided by a sophisticated switched mode power supply which will ensure years of reliable operation. An extensive set of surveillance functions have also been implemented to meet the stringent demands of typical Voice Alarm (life safety) applications. The unit can be controlled using our proprietary WinControl software which offers user friendly control of the beam steering parameters, audio processing and surveillance features.
Typical applications include:
Transport Hubs
Large Places of Worship
Lecture Halls and Theatres
Large Conference Facilities
Atriums
Museums
3D direct SPL plot @ 1 kHz in a 70 x 56 x 35 m room, generated with DDA, showing thesuppression above the listening plane .
Vertical cross section of direct SPL plot @ 1 kHz generated with DDA.
Options available include:
External Ambient Noise and Temperature Sensor
Input section with 1 x 0dBV and 1 x 100V
Input section with 2 x 100V
Full range of mounting accessories
Color matching service
- Short form specifications:
Acoustical:
Freq range
:
130 - 18k Hz (+/-3 dB)
Max SP
Continuous:
98 dBSPL (A-weighed at 30 m)
Peak:
108 dBSPL (A-weighed at 30 m)
Coverage
Horizontal (fixed):
110 deg (-6dB, averaged 1k to 4k Hz)
Vertical (adjustable):
Defined by DDS algorithm
Typical throw:
50 m
Dynamic range
:
>100 dB
Electrical:
Input
Nominal level:
0 dBV (line input)
Type:
dual line input, transformer balanced
Impedance (balanced):
6k8 Ohm
DSP module
Type:
floating point 900 MFLOPS 32 bits
Memory:
64Mb SDRAM + 3Mb non volatile
AD - DA conversion:
24 bits sigma-delta 128 x oversampling
Power amps
Type:
MOSFET (Class AB)
Power:
16 x 100 Wrms (8 Ohm)
Mains
Voltage (+5%/-10%):
90 ~ 270V
Power consumption:
135 VA (idle) / 1600 VA (full load)
General
Temperature range (ambient)
:
0 to 40°C
Transducers
:
14 x 6.5" full range 2 x 1" compression driver, coaxially mounted